Show simple item record

dc.contributor.authorBrast, K.en_US
dc.contributor.authorInstitute of Plastics Processing (IKV)en_US
dc.contributor.authorMichaeli, W.
dc.date.accessioned2006-06-06T17:50:54Z
dc.date.available2006-06-06T17:50:54Z
dc.date.issued2000-05-01en_US
dc.identifier.urihttp://hdl.handle.net/1853/10376
dc.description.abstractThis paper presents the direct strand-deposition process to manufacture long-glass fiber reinforced thermoplastic carrier structures like for instrument board carriers, inside door panels or front-ends. This process is capable to process waste materials out of long- and endless-fiber reinforced thermoplastic components by maintaining the long fibers that the waste materials are providing. A much higher efficiency is obtained compared to recycling methods using the injection molding process where the fibers are degraded through the process. In addition, new recycled compo-leather or bonded leather materials offer the possibility to perform an integrated coating using the direct strand-deposition process for above mentioned applications. Formerly expensive leather interiors within automobiles can be replaced by those cheaper compo-leather materials having the same optics and haptics.
dc.format.extent5706496 bytes
dc.format.extent231 bytes
dc.format.mimetypeapplication/pdf
dc.format.mimetypetext/html
dc.language.isoen_US
dc.publisherGeorgia Institute of Technologyen_US
dc.rightsAccess restricted to authorized Georgia Tech users only.en_US
dc.subjectCompression molding
dc.subjectManufacturing/Fabrication/Processing
dc.subjectCompo-Leather Materials
dc.subjectThermoplastic Composites
dc.subjectRecycling
dc.titleIntegrated Coating of Recycled Long- Glass Fiber Reinforced Thermoplastic Carrier Structures with Compo Leather Materialsen_US
dc.typePresentationen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record