Precision Machining Research Consortium (PMRC)
The Precision Machining Research Consortium at Georgia Tech targets issues in fundamental engineering technology development and implementation methodologies for the enhancement of productivity, part specification conformance, machine tool utilization, and environmental compatibility of material removal and finishing processes.
All materials in SMARTech are protected under U.S. Copyright Law and all rights are reserved. Such materials may be used, quoted or reproduced for educational purposes only with prior permission, provided proper attribution is given. Any redistribution, reproduction or use of the materials, in whole or in part, is prohibited without prior permission of the author.
Collections in this community
-
PMRC Industrial Advisory Board Meeting - 1997 [14]
1997 IAB Meeting, October 29, 1997 -
PMRC Industrial Advisory Board Meeting - 1998 [13]
1998 IAB Meeting, October 14, 1998 -
PMRC Industrial Advisory Board Meeting - 1999 [10]
1999 IAB Meeting, October 20, 1999 -
PMRC Industrial Advisory Board Meeting - 2000 [11]
2000 IAB Meeting, October 18, 2000 -
PMRC Industrial Advisory Board Meeting - 2001 [12]
2001 IAB Meeting, October 16-17, 2001 -
PMRC Industrial Advisory Board Meeting - 2002 [12]
2002 IAB Meeting, October 29, 2002 -
PMRC Industrial Advisory Board Meeting - 2003 [9]
2003 IAB Meeting, October 15, 2003 -
PMRC Industrial Advisory Board Meeting - 2004 [12]
2004 IAB Meeting, October 20, 2004 -
PMRC Industrial Advisory Board Meeting - 2005/06 [14]
2005-06 IAB Meeting, March 15, 2006
Recent Submissions
-
Modeling and Analysis of Fixturing Dynamic Stability in Machining
(Georgia Institute of Technology, 2006-03-15) -
Real-Time Measurement for an Internal Grinding System
(Georgia Institute of Technology, 1997-10-29) -
Bimetallic Machining
(Georgia Institute of Technology, 1997-10-29) -
High Strain Rate Shear Failure of Metals in High-Speed Machining
(Georgia Institute of Technology, 1997-10-29) -
Surface Generation Mechanisms in Hard Turning
(Georgia Institute of Technology, 1997-10-29) -
The Use of a Piezoelectric Transducer to Improve Bandwidth of a CMM
(Georgia Institute of Technology, 1997-10-29) -
Interface Mechanisms of Chemical Mechanical Polishing
(Georgia Institute of Technology, 1997-10-29) -
Contact Potential Difference Probe A Non-Contact Lubricant Film Sensor
(Georgia Institute of Technology, 1997-10-29) -
Characterization and Modeling of the Holding Force in a Magnetic Chuck
(Georgia Institute of Technology, 1997-10-29) -
3D Metrology in Precision Manufacturing
(Georgia Institute of Technology, 1997-10-29) -
Statistical Control of Through Feed Centerless Grinding
(Georgia Institute of Technology, 1997-10-29) -
Characterization and Control of Subsurface Damage in Grinding Titanium Aluminide
(Georgia Institute of Technology, 1997-10-29) -
A General Cutting Force Model For Milling Operations
(Georgia Institute of Technology, 1997-10-29) -
Bearing Condition Monitoring
(Georgia Institute of Technology, 1997-10-29) -
Environmental Implications Of Cutting Fluids
(Georgia Institute of Technology, 1997-10-29) -
Overview of Computational Metrology
(Georgia Institute of Technology, 1998-10-14) -
In-Process Gaging for Cylindrical Grinding
(Georgia Institute of Technology, 1998-10-14) -
Surface Generation Mechanisms in Finish Hard Turning
(Georgia Institute of Technology, 1998-10-14) -
Fixture Layout Synthesis Using the Genetic Algorithm
(Georgia Institute of Technology, 1998-10-14) -
Characterization and Modeling of the Holding Force in a Magnetic Chuck
(Georgia Institute of Technology, 1998-10-14)