dc.contributor.advisor Garimella, Srinivas dc.contributor.author Roeder, Alexander Aryn dc.date.accessioned 2019-01-16T17:24:18Z dc.date.available 2019-01-16T17:24:18Z dc.date.created 2018-12 dc.date.issued 2018-11-13 dc.date.submitted December 2018 dc.identifier.uri http://hdl.handle.net/1853/60785 dc.description.abstract Part one of the thesis presents a mathematical framework to simulate the transient response of a desorber for small-capacity ammonia-water absorption heat pumps. The model is based on dynamic analysis of conservation equations and accounts for the thermal capacitances in the heat exchanger wall material and fluid volumes. The numerical solver and its implementation are presented. Improved computational performance is achieved by using advanced solvers for stiff differential-algebraic equations. The model is utilized to predict desorber performance at steady-state conditions and to simulate the transient response of the component to ramping or perturbation of input parameters from steady state. It can also be used to develop reduced-order models suitable for the design of control strategies to optimize system performance. Part two of the thesis presents an optimal control scheme for an electric vehicle cabin air conditioning system. The energy efficient control of a vehicle’s air conditioning (AC) system is of great importance in any modern automobile. However, the goal of maximizing the driving range of battery electric vehicles has increased the interest in sophisticated control strategies. This work presents a control scheme for the air conditioning system of an electric vehicle based on non-linear, constrained optimal control theory with the simultaneous goals of reducing the energy consumption of the AC system and meeting the passengers’ required cabin conditions. Cabin and air system models are derived to define the dynamics of the thermal system. Different formulations of the cabin outlet air temperature available in the literature are explored. From these models, an optimal control problem (OCP) is formulated, with system constraints explicitly considered. The OCP is transformed into a non-linear program using the direct multiple shooting strategy and fourth-order Runge-Kutta method. The open-source IPOPT solver is applied, with the required derivatives provided by the CasADi toolkit. The effectiveness of the proposed optimal control scheme in reducing the energy consumption of the electric vehicle AC system is compared to a simple feedback controller using scenarios with constant and time-varying disturbances. dc.format.mimetype application/pdf dc.language.iso en_US dc.publisher Georgia Institute of Technology dc.subject Transient modeling dc.subject Ammonia-water dc.subject Absorption heat pumps dc.subject Desorber/generator dc.subject Optimal control dc.subject Electric vehicle dc.subject Air conditioning dc.title Transient simulation of ammonia-water mixture desorption for absorption heat pumps & optimal control of an electric vehicle cabin air conditioning system dc.type Thesis dc.description.degree M.S. dc.contributor.department Mechanical Engineering thesis.degree.level Masters dc.contributor.committeeMember Neitzel, G. Paul dc.contributor.committeeMember Sawodny, Oliver dc.contributor.committeeMember Säger, Ulf dc.date.updated 2019-01-16T17:24:18Z
﻿