Design and development of a layer-based additive manufacturing process for the realization of metal parts of designed mesostructure

Show full item record

Please use this identifier to cite or link to this item: http://hdl.handle.net/1853/22687

Title: Design and development of a layer-based additive manufacturing process for the realization of metal parts of designed mesostructure
Author: Williams, Christopher Bryant
Abstract: Low-density cellular materials, metallic bodies with gaseous voids, are a unique class of materials that are characterized by their high strength, low mass, good energy absorption characteristics, and good thermal and acoustic insulation properties. In an effort to take advantage of this entire suite of positive mechanical traits, designers are tailoring the cellular mesostructure for multiple design objectives. Unfortunately, existing cellular material manufacturing technologies limit the design space as they are limited to certain part mesostructure, material type, and macrostructure. The opportunity that exists to improve the design of existing products, and the ability to reap the benefits of cellular materials in new applications is the driving force behind this research. As such, the primary research goal of this work is to design, embody, and analyze a manufacturing process that provides a designer the ability to specify the material type, material composition, void morphology, and mesostructure topology for any conceivable part geometry. The accomplishment of this goal is achieved in three phases of research: Design Following a systematic design process and a rigorous selection exercise, a layer-based additive manufacturing process is designed that is capable of meeting the unique requirements of fabricating cellular material geometry. Specifically, metal parts of designed mesostructure are fabricated via three-dimensional printing of metal oxide ceramic powder followed by post-processing in a reducing atmosphere. Embodiment The primary research hypothesis is verified through the use of the designed manufacturing process chain to successfully realize metal parts of designed mesostructure. Modeling & Evaluation The designed manufacturing process is modeled in this final research phase so as to increase understanding of experimental results and to establish a foundation for future analytical modeling research. In addition to an analysis of the physics of primitive creation and an investigation of failure modes during the layered fabrication of thin trusses, build time and cost models are presented in order to verify claims of the process s economic benefits. The main contribution of this research is the embodiment of a novel manner for realizing metal parts of designed mesostructure.
Type: Dissertation
URI: http://hdl.handle.net/1853/22687
Date: 2008-01-15
Publisher: Georgia Institute of Technology
Subject: Cellular materials
Three-dimensional printing
Rapid prototyping
Designed mesostructure
Additive manufacturing
Metal oxide reduction
Porous materials
Foamed materials
Manufacturing processes
Department: Mechanical Engineering
Advisor: Committee Co-Chair: David Rosen; Committee Co-Chair: Farrokh Mistree; Committee Member: David McDowell; Committee Member: Hamid Garmestani; Committee Member: Joe Cochran; Committee Member: Shreyes Melkote
Degree: Ph.D.

All materials in SMARTech are protected under U.S. Copyright Law and all rights are reserved, unless otherwise specifically indicated on or in the materials.

Files in this item

Files Size Format View
Williams_Christopher_B_200804_phd.pdf 6.099Mb PDF View/ Open

This item appears in the following Collection(s)

Show full item record